G3 Elevator Starter Kit
166 300 ₽ · В наличии · Артикул: UA-G3-SK-Elevator
Подключается к считывателям в кабине лифта через PoE для авторизации выбора этажа. Поддерживает до 18 этажей и оснащён цифровыми входами для контроля состояния кабины лифта и аварийных ситуаций.
Характеристики
| Тип | Комплект |
|---|---|
| Uplink | 1 |
| Dimensions | 40 x 105 x 25 mm (1.6 x 4.1 x 1") |
| Weight | PoE in: 77 g (2.7 oz) PoE out: 79 g (2.8 oz) |
| Enclosure Material | Polycarbonate |
| Mounting | In-wall, gang box (Included) Junction box (Optional) |
| Ambient Operating Temperature | -10 to 40° C (14 to 104° F) |
| Ambient Operating Humidity | 5 to 95% noncondensing |
| NDAA Compliant | ✓ |
| Certifications | CE, FCC, IC |
| NFC Card & Keyfob Access | ✓ |
| Mobile Unlock | ✓ |
| Weatherproofing | IP55 |
| Maximum User Count | 6 |
| UL 294 Level | Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I |
| Mount Material | Aluminum alloy |
| Indoor and Outdoor Use | ✓ |
| Networking Interface | (1) 10/100 MbE (1) Homeplug AV |
| Connectivity | BLE 4.1 NFC |
| Power Method | PoE++ |
| Max. Power Consumption | 3W (Without PoE output) |
| Supported Voltage Range | 48V DC |
| ESD/EMP Protection | Air: ± 8kV, contact: ± 4kV |
| Speaker | Yes |
| LEDs | White |
| Button | (1) Factory reset |
| NFC Frequency | 13.56 MHz |
| NFC Read Range | < 30 mm (1.18'') |
| NFC Technology | ISO/IEC 14443 Type A MIFARE DESFire UniFi Access Proprietary Security Protocol |
| PoE Cabling Requirements | Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable. |
| UL 294 Statement | Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
| CAN/ULC-60839-11-1 Grade | Grade assignment: I |
| Management Application | Access |
| Software Information | The software version can be checked at https://unifi.ui.com |
| Management | (1) 10/100 MbE |
| Mounting Material | Polycarbonate |
| In the Box | (1) Elevator Hub (1) G3 Reader (2) 2-wire PoE extenders (10) Access Cards |
| PoE Interface | PoE input: (1) PoE++, 50V DC, Max. 1.2A PoE output: (1) PoE+, 48V DC, 0.72A |
| Digital Input | (1) Emergency (1) Car position (5-bit) (1) Car status: Up/Down/Stop/Full (1) Door status: Open/Close |
| Sensors | Proximity sensor |
| Buttons | (1) Factory reset Terminal blocks |
| Touch Pass | ✓ |
| Apple/Google Wallet | ✓ |
| Handwave Request to Exit | ✓ |
| Format | ISO 7810 ID-1 |
| Outputs | (18) Relays Rating 30V DC/2A |
| Recommend Max. Cable Length | Learn More |
No products match your search.
Loading more…
